• Find Product


    Dealer Locator
    On-Line Dealers

  • Call Us


    805-466-1717
     

  • Email Us


Grip-It™ Instant Adhesive

Instant Grip Glue - Recreation CA - BSI Adhesives Available Sizes:
BSI-221 1/2 oz. (14.2g)
BSI-222 1 oz. (28.4g)

Grip-it™ has been specifically formulated for applying grips and mats for recreational vehicles. Grip-It™ works great on all makes of grips for motorcycles, jet skis, snowmobiles and bicycles. Grip-It™ has a 10-25 second working time and the grip is rideable within 5 minutes. Grip-It™ also works great for replacing rubber mats. Available in a 1 oz. bottle that will bond up to 12 sets of grips. Suggested retail price of $7.99.

Works Best On:

  • Water Craft
  • Motorcycles
  • Bicycles
  • ATVs
  • Snowmobiles

 

  • Rubber Mats
  • Fiberglass
  • Metal
  • Hardwoods
  • Plastics

Cover directly below work area with a cloth to prevent any drips from getting on vehicle (do not use paper).

Grip-it™ acts as a lubricant, the more you use the easier the grip will slide on. There will be excess glue that you’ll need to wipe immediately with a cloth towel.

It is easier to apply grips if you “spin” it as you’re putting it on. Stop turning when you have the grip in the proper position.

Determine mat alignment before applying Grip-it™. Apply the furthest away from you first, and then work your way toward yourself pressing down firmly.

Always work in a well-ventilated area.

    1. Cover directly below work area with a cloth to prevent any drips from getting on vehicle (do not use paper).
    2. Grip-it™ acts as a lubricant, the more you use the easier the grip will slide on. There will be excess glue that you’ll need to wipe immediately with a cloth towel.
    3. It is easier to apply grips if you “spin” it as you’re putting it on. Stop turning when you have the grip in the proper position.
    4. Determine mat alignment before applying Grip-it™. Apply the furthest away from you first, and then work your way toward yourself pressing down firmly.
    5. Always work in a well-ventilated area.

Grip-It™ Cyanoacrylate is a single component adhesive that polymerizes rapidly when pressed into a thin film. The moisture absorbed on both surfaces initiates the curing of Grip-It™ and forms a permanent bond. Grip-It™ bonds close fitting surfaces including rubber, metal and plastic.


Physical Properties of Liquid Adhesive:  
Base Compound Ethyl Cyanoacrylate
Appearance Clear liquid
Viscosity at 20°F 2,000 cps
Specific Gravity 1.0
Shelf Life at 65°F 2 years
Flash Point 83°C/181°F
Set Time 10-25 seconds
Military Classification Per Mil-A-46050-C Type II/Class 2
Physical Properties of Solid Adhesive (cured):  
Operating Temperature (°F) -40°F to 230°F
Dielectric Strength (KV/mn) 11.6
Coefficient of Thermal Expansion (in/in/F) 1.26x10 to the
negative 4
Solubility Acetone, Nitromethane, MEK
Tensile Shear Strength, Steel Psi 2,800
Set Time Across a 4 Mil Gap 30 seconds

Other Products You Might be Interested In: